Administrator Guide

Default
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#clear pe 4 statistics
connect pe
Connect to a port extender (PE) through Telnet.
C9000 Series
Syntax
connect pe pe-id
Parameters
pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
Default
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
You can connect to an attached PE through Telnet using the connect pe command and view information
specific to the PE system. After you log in to a port extender, enter ? or help to display a list of supported
commands.
Example
Dell#connect pe 254
Login: peadmin
Password:
DellPE>
feature extended-bridge
Enable 802.1BR (bridge port extender) support on the switch.
C9000 Series
Syntax
[no] feature extended-bridge
To disable 802.1BR support on the switch, use the no feature extended-bridge command.
Default None
1248 Port Extenders (PE)