Administrator Guide

0 0 50 50
IFMGR0 IFAGT2 0 1 0 0
1 1 60 60
Example: show
processes ipc
flow-control pe
Dell#show processes ipc flow-control pe 255 stack-unit 1
Q Statistics on PE unit 1 of PEID 255
TxProcess RxProcess Cur High Time Retr
Msg Ack Aval Max
Len Mark Out ies
Sent Rcvd Retra Retra
BRAGT1 BRMGR0 0 2 0 0
2 2 25 25
L2AGENT1 MACMGR0 0 0 0 0
0 0 90 90
IFAGT1 IFMGR0 0 1 0 0
5 5 60 60
IFAGT1 IFMGR0 0 50 0 0 74350
74350 60 60
SFL_LP1 SFL_CP0 0 4 0 0
52 52 25 25
show processes memory
View information about memory usage for processes running in the system.
C9000 Series
Syntax
show processes memory [cp | lp {slot-id | all |summary} | pe {pe-id stack-unit
unit-number | all | summary} | rp]
Parameters
cp Enter the keyword cp to view memory usage for the Control Processor.
rp Enter the keyword rp to view memory usage for the Route Processor.
lp slot-id Enter the slot ID of the line card for which you want to view CPU memory usage. The
range of switch slot IDs is from 0 to 2. Enter linecard all to display memory usage
on all line card CPUs. Enter linecard summary to display a summary of memory
usage on all line card CPUs.
pe pe-id Enter the keyword pe and the port extender (PE) ID.pe-id. Range is from 0 to 255.
NOTE: The pe option is only visible when the feature extended bridge is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and the stack unit-number. Range is from 0 to 7.
Command Modes
• EXEC
• EXEC Privilege
Defaults Display detailed information on memory usage on all switch CPUs (Control Processor, Route Processor, Port
Extender, and Line Cards).
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Control and Monitoring 121