Administrator Guide
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Defaults Enabled, that is sending of routing updates are enabled by default.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information
By default, no interfaces are passive. Routing updates are sent to all interfaces on which the routing protocol is
enabled.
If you disable the sending of routing updates on an interface, the particular address prefix continues to be
advertised to other interfaces, and updates from other routers on that interface continue to be received and
processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified router interface. The specified
interface address appears as a stub network in the OSPFv3 for IPv6 domain.
redistribute
Redistribute into OSPFv3.
C9000 Series
Syntax
redistribute {bgp as number}{connected | static}[metric metric-value | metric-
type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
bgp
as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically connected
interfaces.
static
Enter the keyword static to redistribute manually configured routes.
metric
metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
1158 Open Shortest Path First (OSPFv2 and OSPFv3)