Administrator Guide

Interface IP-Address OK Method Status Protocol
TenGigabitEthernet 0/0 unassigned NO Manual administratively down down
TenGigabitEthernet 0/1 unassigned NO Manual administratively down down
TenGigabitEthernet 0/2 unassigned NO Manual administratively down down
TenGigabitEthernet 0/3 unassigned NO Manual administratively down down
TenGigabitEthernet 0/4 unassigned NO Manual administratively down down
TenGigabitEthernet 0/5 unassigned NO Manual administratively down down
TenGigabitEthernet 0/6 unassigned NO Manual administratively down down
Dell#show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: E9.9(0.0)
Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Mon Jun 1 15:00:00 2015
Build Path: /build/build03/SW/SRC
Dell Networking OS uptime is 15 hour(s), 13 minute(s)
System image file is "system://A"
System Type: C9010
Control Processor: Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory, core(s) 2.
Route Processor: Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory, core(s) 2.
16G bytes of boot flash memory.
2 Route Processor Module.
3 24-port TE/GE (VG)
3 24-port TE/GE (VG)
4 6-port TE/FG (VG)
2 4-port TE/GE (VG)
208 Ten GigabitEthernet/IEEE 802.3 in10 Forty GigabitEthernet/IEEE 802.3 interface(s)
Dell#
Dell(conf)#do show running-config interface tengigabitethernet 0/0
!
interface TenGigabitEthernet 0/0
no ip address
shutdown
Dell(conf)#
Undoing Commands
When you enter a command, the command line is added to the running configuration file (running-config).
To disable a command and remove it from the running-config, enter the no command, then the original command. For example,
to delete an IP address configured on an interface, use the no ip address ip-address command.
NOTE: Use the help or ? command as described in Obtaining Help.
Example of Viewing Disabled Commands
Dell(conf)#interface tengigabitethernet 4/17
Dell(conf-if-te-4/17)#ip address 192.168.10.1/24
Dell(conf-if-te-4/17)#show config
!
interface TenGigabitEthernet 4/17
ip address 192.168.10.1/24
no shutdown
Dell(conf-if-te-4/17)#no ip address
Dell(conf-if-te-4/17)#show config
!
interface TenGigabitEthernet 4/17
no ip address
no shutdown
38
Configuration Fundamentals