Users Guide

NOTE: When you load the startup configuration or a configuration file from a network server such as TFTP to the running

configuration, the configuration is added to the running configuration. This does not replace the existing running configuration.

Commands in the configuration file has precedence over commands in the running configuration.

Configure the Overload Bit for a Startup Scenario

For information about setting the router overload bit for a specific period of time after a switch reload is implemented, refer to the

Intermediate System to Intermediate System (IS-IS) section in the Dell Networking OS Command Line Reference Guide.

Viewing Files

You can only view file information and content on local file systems.

To view a list of files or the contents of a file, use the following commands.

• View a list of files on the internal flash.

EXEC Privilege mode

dir flash:

• View the contents of a file in the internal flash.

EXEC Privilege mode

show file flash://filename

• View a list of files on an external flash.

EXEC Privilege mode

dir usbflash:

• View the running-configuration.

EXEC Privilege mode

show running-config

• View the startup-configuration.

EXEC Privilege mode

show startup-config

Example of the dir Command

The output of the dir command also shows the read/write privileges, size (in bytes), and date of modification for each file.

Dell# dir

Directory of flash:

1 drwx 4096 Jan 01 1980 00:00:00 +00:00 .

2 drwx 2380 Sep 30 2015 16:59:51 +00:00 ..

3 drwx 4096 May 20 2015 10:45:42 +00:00 TRACE_LOG_DIR

4 drwx 4096 May 20 2015 10:45:42 +00:00 CONFD_LOG_DIR

5 drwx 12288 May 20 2015 10:45:42 +00:00 CRASH_LOG_DIR

6 drwx 28672 May 20 2015 10:45:42 +00:00 CORE_DUMP_DIR

7 drwx 4096 May 20 2015 10:45:42 +00:00 DEFAULT_DIAG_REPORT_DIR

8 d--- 4096 May 20 2015 10:45:44 +00:00 ADMIN_DIR

9 drwx 4096 May 20 2015 10:45:44 +00:00 RUNTIME_PATCH_DIR

10 -rwx 23495 May 21 2015 10:53:00 +00:00 0521_6unit.cfg

11 -rwx 25350 May 20 2015 16:22:44 +00:00 0520_6unit.cfg

12 -rwx 33901 Jul 29 2015 01:48:08 +00:00 backup1

13 -rwx 32267 Aug 07 2015 14:45:26 +00:00 startup-config.bak

Getting Started