Users Guide

Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. GVRP configuration is per interface on a switch-by-switch
basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following example,
GVRP is configured on VLAN trunk ports.
Figure 43. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1 Enabling GVRP Globally
2 Enabling GVRP on a Layer 2 Interface
Related Configuration Tasks
• Configure GVRP Registration
• Configure a GARP Timer
400
GARP VLAN Registration Protocol (GVRP)