Administrator Guide

Example
R3# show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 1/0 Disabled No
Te 1/1 Disabled No
Te 1/2 Enabled No
Te 1/3 Disabled No
Te 1/4 Disabled No
Te 1/5 Disabled No
Te 1/6 Disabled No
Te 1/7 Disabled No
Te 1/8 Disabled No
R3# show gvrp brief
Related
Commands
show gvrp statistics — displays the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
C9000 Series
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface then one of the interface keywords
and slot/ port or number information:
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Inroduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
Invalid messages/attributes skipped can occur in the following cases:
● The incoming GVRP PDU has an incorrect length.
● "End of PDU" was reached before the complete attribute could be parsed.
696 GARP VLAN Registration (GVRP)