Administrator Guide

● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.6(0.0) Introduced on the Z9500.
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-
iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-
iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage
Information
The switch learns only the active sessions which it observes; sessions flowing through an adjacent switch
are not learned.
After you reload the switch, session information exchanged during the initial handshake is not available. If
the switch picks up session communication after reloading, it detects iSCSI sessions in progress but
sometimes cannot obtain complete session information. Incomplete information about active iSCSI
sessions is not displayed in show iscsi session command output.
In a VLT configuration, show iscsi session output is not accurate unless there are iSCSI traffic
flows on VLT LAGs on both the target and the initiator side of the VLT domain.
Related
Commands
● show iscsi — displays the currently configured iSCSI settings.
● show iscsi session detailed— displays detailed information about active iSCSI sessions on the switch.
● show run iscsi— shows run iscsi.
show iscsi session detailed
Display detailed information on active iSCSI sessions on the switch.
C9000 Series
Syntax
show iscsi session detailed [session isid]
Parameters
isid Enter the session’s iSCSi ID to display detailed information about the specified
iSCSi session.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
iSCSI Optimization 1007