Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

971

972

973

974

975

976

977

978

979

980

dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the

switch dynamically learns.

interface

(OPTIONAL) Enter the keyword interface then the interface type, slot and port

information:

• For a Port Channel interface, enter the keywords port-channel then a number.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/

port information.

• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the

pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-

unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.

• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE

then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;

the stack-unit unit-number range is from 0 to 7; and the port-id range is 25 to 28 or

49 to 52 depending on the PE.

static (OPTIONAL) Enter the keyword static to display only those MAC addresses

specifically configured on the switch.

vlan

vlan-id

(OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address

assigned to the VLAN. The range is 1 to 4094.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.13.0.1P1 Introduced peTenGigE interface support on the C9010.

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.3.7.0 Introduced on the S4810.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Example

Dell# show cam mac linecard 1 port-set 0

PVlanId Mac Address Region Interface

1 00:01:02:03:04:09 DYNAMIC Fo 2/0

0 74:86:7a:ff:6f:1c LOCAL_DA 00001

1 00:11:22:33:44:55 STATIC Fo 2/8

1 00:01:02:03:04:07 DYNAMIC Fo 2/0

1 00:01:02:03:04:08 DYNAMIC Fo 2/0

0 ff:ff:ff:ff:ff:ff STATIC 00001

1 00:01:02:03:04:05 DYNAMIC Fo 2/0

1 00:01:02:03:04:06 DYNAMIC Fo 2/0

978 Layer 2