Administrator Guide
PeGi 255/3/10 Up 1000 Mbit Full --
PeGi 255/3/11 Up 1000 Mbit Full --
PeGi 255/3/12 Up 1000 Mbit Full --
PeGi 255/3/13 Up 1000 Mbit Full --
PeGi 255/3/14 Up 1000 Mbit Full --
PeGi 255/3/15 Up 1000 Mbit Full --
PeGi 255/3/16 Up 1000 Mbit Full --
PeGi 255/3/17 Up 1000 Mbit Full --
PeGi 255/3/18 Up 1000 Mbit Full --
PeGi 255/3/19 Up 1000 Mbit Full --
PeGi 255/3/20 Up 1000 Mbit Full --
PeGi 255/3/21 Up 1000 Mbit Full --
PeGi 255/3/22 Up 1000 Mbit Full --
PeGi 255/3/23 Up 1000 Mbit Full --
PeGi 255/3/24 Up 1000 Mbit Full --
PeGi 255/3/25 Up 1000 Mbit Full --
PeGi 255/3/26 Up 1000 Mbit Full --
PeGi 255/3/27 Up 1000 Mbit Full --
PeGi 255/3/28 Up 1000 Mbit Full --
PeGi 255/3/29 Up 1000 Mbit Full --
PeGi 255/3/30 Up 1000 Mbit Full --
PeGi 255/3/31 Up 1000 Mbit Full --
PeGi 255/3/32 Up 1000 Mbit Full --
PeGi 255/3/33 Up 1000 Mbit Full --
PeGi 255/3/34 Up 1000 Mbit Full --
PeGi 255/3/35 Up 1000 Mbit Full --
PeGi 255/3/36 Up 1000 Mbit Full --
PeGi 255/3/37 Up 1000 Mbit Full --
PeGi 255/3/38 Up 1000 Mbit Full --
PeGi 255/3/39 Down Auto Auto --
PeGi 255/3/40 Up 1000 Mbit Full --
PeGi 255/3/41 Down Auto Auto --
PeGi 255/3/42 Down Auto Auto --
PeGi 255/3/43 Up 1000 Mbit Full --
PeGi 255/3/44 Up 1000 Mbit Full --
PeGi 255/3/45 Up 1000 Mbit Full --
PeGi 255/3/46 Down Auto Auto --
PeGi 255/3/47 Up 1000 Mbit Full 111
PeGi 255/3/48 Up 1000 Mbit Full 111
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE 802.1Q tag status
and VLAN membership.
C9000 Series
Syntax
show interfaces switchport [interface] [linecard slot-id]
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port (ports or port-range) information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port (ports or port-range) information.
• Enter the keyword backup to view the backup interface for this interface.
• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the
pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.
Interfaces 737