Administrator Guide

NOTE: This command must be enabled before the show cpu-traffic-stats command displays
traffic statistics. Dell Networking recommends disabling debugging (no debug cpu-traffic-
stats) after troubleshooting is complete.
Related
Commands
show cpu-traffic-stats — displays the cpu traffic statistics.
debug ftpserver
View transactions during an FTP session when a user is logged into the FTP server.
C9000 Series
Syntax
debug ftpserver
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
disable
Return to EXEC mode.
C9000 Series
Syntax
disable [level]
From a port extender (PE) console, use disable [level] to return to EXEC mode.
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell Networking OS. The range is
from 0 to 15. The default is 1.
Defaults 1
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
70 Control and Monitoring