Administrator Guide
• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the
pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.
• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is 25 to 28 or
49 to 52 depending on the PE.
vrrp [[ipv6]
vrid
] (OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To clear
the counters of VRRP groups on all IPv6 interfaces, enter ipv6. To clear the counters of
a specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear unknown source address
(SA) drop counters when MAC learning limit is configured on the interface.
vlan
vlan-id
Enter the keyword vlan then the interface VLAN number. The range is from 1 to 4094.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Added the vlan parameter.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale. Prior to the release, 2094 was
supported.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the definition of the learning-limit option for clarity.
Usage Information
To clear counters for multiple ports on the interfaces at one time. You can specify any random port number or a
range of ports, or a combination of both.
To clear counters for a range of ports, you can enter a hyphenated range of one or more port range values
separated with commas; for example, clear counters FortyGigE 1/0-4,7,9-11. To clear counters for
any random number of ports, you can enter a comma-separated string of port numbers, for example clear
counters FortyGigE 1/0/1,9,11
In a dual homing setup, you can use this command only from the primary VLT peer.
Interfaces 681