Administrator Guide

Example
Dell# show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
Dell#
Related
Commands
garp timers — sets the intervals (in milliseconds) for sending GARP messages.
show gvrp
Display the GVRP configuration.
C9000 Series
Syntax
show gvrp [brief | interface]
Parameters
brief (OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP
configuration.
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage Information If no ports are GVRP participants, the message output changes from GVRP Participants running on
<port_list> to GVRP Participants running on no ports.
Example
R3# show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 1/0 Disabled No
Te 1/1 Disabled No
GARP VLAN Registration (GVRP) 667