Administrator Guide

console
This is the banner
Dell Networking OS con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line
console
This is the banner
Dell>
Related
Commands
line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
C9000 Series
Syntax
banner login {acknowledgement | keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive
Enter the keyword keyboard-interactive to require a carriage return (CR) to get
the message banner prompt.
acknowledgement Enter the acknowledgement keyword to require a positive acknowledgement from the
user while logging in to the system.
c Enter a delineator character to specify the limits of the text banner. The delineator is a
percent character (%).
line Enter a text string for your text banner message ending the message with your delineator.
The delineator is a percent character (%). Range: maximum of 50 lines, up to 255
characters per line
Defaults No banner is configured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the acknowledgement keyword.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced the keyword keyboard-interactive.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
62 Control and Monitoring