Administrator Guide
Version Description
8.3.7.0 Introduced on the S4810.
Usage Information You must save the configuration and reload the system to implement ASF. When you enter the command, the
system sends a message stating that the new mode is enabled when the system reloads.
banner exec
Configure a message that is displayed when your enter EXEC mode.
C9000 Series
Syntax
banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c
Enter the keywords banner exec, then enter a character delineator, represented here
by the letter c. Press ENTER.
line
Enter a text string for your banner message ending the message with your delineator. In
the following example, the delineator is a percent character (%); the banner message is
“testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original Command
Usage Information After entering the banner exec command, type one or more spaces and a delineator character. Enter the
banner text then the second delineator character. When you connect to the router, if a message of the day
banner is configured, it displays first. If no message of the day banner is configured, the login banner and prompt
appear. After logged in, the EXEC banner (if configured) displays.
Example
Dell(conf)#banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on
line
Control and Monitoring 61