Administrator Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
Dell# show ip dhcp client statistics interface fortyGigE 2/0
Interface Name Fo 2/0
Message Received
DHCPOFFER 9
DHCPACK 9
DHCPNAK 0
Message Sent
DHCPDISCOVER 53
DHCPREQUEST 9
DHCPDECLINE 0
DHCPRELEASE 6
DHCPREBIND 0
DHCPRENEW 0
DHCPINFORM 0
show ip dhcp configuration
Display the DHCP configuration.
C9000 Series
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name Display the configuration for a DHCP pool.
global Display the DHCP configuration for the entire system.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
Dell# show ip dhcp configuration global
Protocol status : Enabled
Number of ping packets : 1
Dell#
Dell# show ip dhcp configuration pool p1
Pool Name : p1
Dynamic Host Configuration Protocol (DHCP) 607