Administrator Guide

L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL
EID 0x0000130d: gid=0xd,
slice=0, slice_idx=0x1, part =0 prio=0x130d, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0x1, part =1 prio=0x130d, flags=0x10204,
Installed, Enabled
tcam: color_indep=0,
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 110 slice = 0 idx=4 entries=1}{Packets}
Usage Information
The port-set values are internal port numbers.
show hardware mac
Display information about the MAC ACLs used on a line card and port-sets.
C9000 Series
Syntax
show hardware mac {eg-acl {pe pe-id stack-unit unit-number port-set port-pipe-
id counters | linecard slot-id port-set number}| in-acl {pe pe-id stack-unit
unit-number port-set port-pipe-id counters | linecard slot-id port-set
number }}
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to display ingress or egress
ACL data.
linecard slot-id Enter the linecard slot-id parameters to specify a line card. The range of slot IDs
is from 0 to 11.
pe pe-id Enter the pepe-id parameters to specify a port extender (PE). The PE ID range is from
0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the stack-unitunit-number parameters to specify a stack-unit. The stack-
unit range is from 0 to 7.
port-set number Enter the keyword port-set number parameters to specify a port pipe (set of ports)
on a line card. The port set number is 0.
586 Debugging and Diagnostics