Administrator Guide

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
• For a port extender (PE) Gigabit Ethernet interface, enter the keyword
peGigabitEthernet then the pe-id, stack-unit unit number, and port-id. The pe-id
range is 0–255; the stack unit number range is 0–7; and the port-ID range is 0 –47.
• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is 25 to 28 or
49 to 52 depending on the PE.
NOTE: The peGigE or peTenGigE interface option is only available when the
extended bridge is enabled.
buffer-info Enter the keyword buffer-info to view the total buffer allocated for the Interface
priority-group
group number | all
Enter the keyword priority-group and specify a priority group number or all the
priority groups. The range for priority group is from 0 to 7.
queue queue
number | all
Enter the keyword queue and specify a queue number or select all for all the queues. The
range for queue number is from 0 to 19.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
Example (show
hardware buffer
interface peGige
buffer-info)
Dell#show hardware buffer interface peGigE 10/1/1 buffer-info
----- Buffer Stats for Interface PeGi 10/1/1 -----
Maximum Shared Limit for the Interface: 6956
Default Packet Buffer allocate for the Interface: 160
Used Packet Buffer for the Interface: 0
Example (priority-
group 0)
Dell# show hardware buffer interface peGigE 10/1/1 priority-group 0 buffer-
info
----- Buffer stats for unit: 0 port: 1 (interface PeGi 10/1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 - 19584 0 STATIC 174 0 0 0
Example (queue
all)
Dell#show hardware buffer interface peGigE 10/1/1 queue all buffer-info
----- Buffer Stats for Interface PeGi 10/1/1 Queue 0 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 1 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 2 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Debugging and Diagnostics 581