Administrator Guide

Parameters
default Use the default CAM profile settings and set the CAM as follows:
• L2Acl : 5
• IPV4Acl : 4
• IPV6Acl : 0
• IPV4Qos : 2
• L2Qos : 1
• L2PT : 0
• IpMacAcl : 0
• VmanQos : 0
• VmanDualQos : 0
• EcfmAcl : 0
• nlbclusteracl: 0
• FcoeAcl : 0
• iscsiOptAcl : 0
• ipv4pbr : 0
• Openflow : 0
• fedgovacl : 0
• vrfv4Acl : 0
l2acl number Enter the keyword l2acl and then the number of l2acl blocks. The range is from 1 to 8.
ipv4acl number Enter the keyword ipv4acl and then the number of FP blocks for IPv4. The range is
from 0 to 8.
ipv6acl number Enter the keyword ipv6acl and then the number of FP blocks for IPv6. The range is
from 0 to 2.
ipv4qos number Enter the keyword ipv4qos and then the number of FP blocks for IPv4. The range is
from 0 to 8.
l2qos number Enter the keyword l2qos and then the number of FP blocks for l2 qos. The range is from
1to 8.
l2pt number Enter the keyword l2pt and then the number of FP blocks for l2 protocol tunnelling. The
range is from 0 to 1.
Ipmacacl number Enter the keyword ipmacacl and then the number of FP blocks for IP and MAC ACL.
The range is from 0 to 6.
ecfmacl number Enter the keyword ecfmacacl and then the number of FP blocks for ECFM ACL. The
range is from 0 to 5.
nlbclusteracl
number
Enter the keyword nlbclusteracl and then the number of FP blocks for nlbcluster
ACL. The range is from 0 to 2. By default the value is 0 and it supports 8 NLB arp entries
reserved for internal functionality.
Vman-qos|vman-
dual-qos number
Enter the keyword evman-qos and then the number of FP blocks for VMAN QoS. The
range is from 0 to 6.
vman-dual-qos
number
Enter the keyword vman-dual-qos and then the number of FP blocks for VMAN dual
QoS. The range is from 0 to 4.
Ipv4pbr number Enter the keyword ipv4pbr and then the number of FP blocks for ipv4pbr ACL. The
range is from 0 to 8.
Openflow number Enter the keyword openflow and then the number of FP blocks for open flow (multiples
of 4). The range is from 0 to 8.
fcoeacl number Enter the keyword fcoeacl and then the number of FP blocks for FCOE ACL. The
range is from 0 to 6.
Iscsioptacl
number
Enter the keyword iscsioptacl and then the number of FP blocks for iSCSI
optimization ACL. The range is from 0 to 2.
fedgovacl Enter the keyword fedgovacl and then the number of FP blocks for Fed Gov ACL. The
range is from 0 to 8.
Content Addressable Memory (CAM) 479