Administrator Guide

mac access-list extended
Configure an extended MAC access control list (extended MAC ACL).
C9000 Series
Syntax
mac access-list extended access-list-name [cpu-qos]
To delete a MAC access list, use the no mac access-list extended access-list-name [cpu-
qos] command.
Parameters
access-list-name Enter a text string as the MAC access list name, up to 140 characters.
cpu-qos Enter the keyword cpu-qos to configure an extended MAC ACL to be used only to filter
protocol traffic for control-plane policing (CoPP).
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up
to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
The number of entries allowed per ACL is hardware-dependent. For detailed specifications on entries allowed per
ACL, refer to your line card documentation.
If you configure an extended MAC ACL to be used only to filter protocol traffic for CoPP, you must enter the
keyword cpu-qos.
Use this command in Configuration Terminal Batch mode to configure an extended MAC access control list in a
dual-homing setup.
Example
Dell(conf)#mac-access-list access-list extended TestMATExt
Dell(config-ext-macl)#remark 5 IPv4
Dell(config-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes
Dell(config-ext-macl)#remark 15 ARP
Dell(config-ext-macl)#seq 20 permit any any ev2 eq 806 count bytes
Dell(config-ext-macl)#remark 25 IPv6
Dell(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count bytes
Dell(config-ext-macl)#seq 40 permit any any count bytes
Dell(config-ext-macl)#exit
Dell(conf)#do show mac accounting access-list snickers interface te 0/47 in
Access Control Lists (ACL) 265