Administrator Guide

Parameters
remark-number (Optional) Enter the remark number. The range is from 0 to 65535 for MAC ACL and 0 to
4294967290 for IP ACL.
NOTE: You can use the same sequence number for the remark and an ACL
rule.
description Enter a description of up to 80 characters.
Defaults Not configured.
Command Modes
• CONFIGURATION-STANDARD-ACCESS-LIST
• CONFIGURATION-EXTENDED-ACCESS-LIST
• CONFIGURATION-MAC ACCESS LIST-STANDARD
• CONFIGURATION-MAC ACCESS LIST-EXTENDED
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14.0.0 Made the remark number as an optional value.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Introduced on the E-Series.
Usage Information
The remark command is available in each ACL mode. You can configure up to 4294967291 remarks for a given IP
ACL and 65536 remarks for a given MAC ACL.
You can include a remark with or without a remark number. If you do not enter a remark number, the remark
inherits the sequence number of the last ACL rule. If there is no ACL rule when you enter a remark, the remark
takes sequence number 5. If you configure two remarks with the same sequence number and different strings,
the second one replaces the first string. You cannot configure two or more remarks with the same string and
different sequence numbers.
To remove a remark, use the no remark command with or without the sequence number. If there is a matching
string, the system deletes the remark.
Access Control Lists (ACL) 213