Administrator Guide

on console
Sep 10 15:20:45: %PE255-UNIT1-M:CP %IFMGR-5-OSTATE_UP: Changed interface
state to up: Te 1/1
Sep 10 15:20:50: %PE255-UNIT1-M:CP %IFMGR-5-ASTATE_UP: Changed interface
Admin state to up: Te 0/1
Sep 10 15:20:50: %PE255-UNIT1-M:CP %IFMGR-5-ASTATE_UP: Changed interface
Admin state to up: Te 0/2
Sep 17 11:39:00: %PE1-UNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user peadmin on line vty0 ( internal Ipa )
Dell#
Related
Commands
• show version — displays the Dell Networking OS version.
• show system — displays the current switch status.
• show environment — displays the system component status.
show util-threshold cpu
Display the utilization thresholds of switch CPUs.
C9000 Series
Syntax
show util—threshold cpu
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series, E-Series, S25 and S50.
Usage Information Use the show util-threshold cpu command to display the CPU utilization thresholds used to send SNMP
traps. When the switch CPUs exceed the configured time to process packets or data, a threshold notification is
sent as an SNMP trap. To reconfigure the currently configured values, use the util-threshold cpu
command.
Example
Dell#show util-threshold cpu
Processor 5Sec 1Min 5Min
High Low High Low High Low
=========================================================
CP 0 0 85 75 80 70
RP 0 0 85 75 80 70
LP 0 0 0 85 75 80 70
LP 1 0 0 85 75 80 70
LP 2 0 0 85 75 80 70
LP 3 0 0 85 75 80 70
LP 4 0 0 85 75 80 70
LP 5 0 0 85 75 80 70
LP 6 0 0 85 75 80 70
LP 7 0 0 85 75 80 70
LP 8 0 0 85 75 80 70
LP 9 0 0 85 75 80 70
LP 10 0 0 85 75 80 70
LP 11 0 0 85 75 80 70
PE 0 0 85 75 80 70
Control and Monitoring 147