Administrator Guide

Boot Selector : 3.3.0.1
RP Boot Selector : 3.3.0.1
CP Mem Size : 2127536128 bytes
RP Mem Size : 2127536128 bytes
Temperature : 28C 54C
Power Status : AC
Voltage : ok
Serial Number : NA
Part Number : 0CKKCP Rev X00
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : CN-0CKKCP-77931-466-0009
PPID Revision : X00
Service Tag : 13NRG02
Expr Svc Code : 239 809 248 2
Auto reboot : Disabled
Dell#show rpm 0 brief
-- RPM card 0 --
Status : active
Next Boot : online
Card Type : RPM - Route Processor Module (C9000-RPM-2.56T)
Hardware Rev : 4.0
Num Ports : 1
Up Time : 32 min, 25 sec
Last Restart : normal power-cycle
Dell Networking OS Version : 9.9(0.0)
Jumbo Capable : yes
Dell#show rpm all
-- Route Processor Modules --
Slot Status NxtBoot Version
--------------------------------------------------------
0 active online 9.9(0.0)
1 booting
Related
Commands
• show chassis – view information on all elements of the system.
• show linecard– view information on a line card.
show software ifm
Display interface management (IFM) data.
C9000 Series
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | linecard
slot-id | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display software pipe
and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the slot/port
information to display interface control block information for that interface:
• For a Port Channel interface, enter the keyword port-channel then a number: The
range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet.
Control and Monitoring 133