Administrator Guide

NetworkType BROADCAST, Cost: 1, Passive: No
Transmit Delay is 100 sec, State DR, Priority 1
Interface is using OSPF global mode BFD configuration.
Designated router on this network is 11.1.1.1 (local)
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 1, Retransmit 5
Dell#
Related
Commands
show ip ospf interface—Display the OSPF interfaces configured.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs) in detail.
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa | external | inter-area-prefix | inter-area-router | intra-area-
prefix | link | network | router | nssa-external]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors
corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keyword database-summary to view a summary of database
LSA information.
external (OPTIONAL): Enter the keyword external to display the external link states.
grace-lsa
(OPTIONAL): Enter the keyword grace-lsa to display the Type-11 Grace LSAs sent
and received on an OSPFv3 router.
inter-area-prefix (OPTIONAL): Enter the keyword inter-area-prefix to display the inter area prefix
link states.
inter-area-router (OPTIONAL): Enter the keyword inter-area-router to display the inter area router
link states.
intra-area-prefix (OPTIONAL): Enter the keyword intra-area-prefix to display the intra area prefix
link states.
link (OPTIONAL): Enter the keyword link to display the link states.
network (OPTIONAL): Enter the keyword network to display the network link states.
nssa-external (OPTIONAL): Enter the keyword nssa-external to display the nssa link state
information.
router (OPTIONAL): Enter the keyword router to display the router link states.
Defaults None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Added support to display all the types of LSAs in detail.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Open Shortest Path First (OSPFv2 and OSPFv3) 1199