Administrator Guide

Parameters
area-id Specify the OSPF area by entering a number from zero (0) to 65535.
no-redistribution (OPTIONAL) Specify that the redistribute command does not distribute routes into
the NSSA. This command can be used when the router is an autonomous system
boundary router (ASBR) or area border router (ABR).
default-
information-
originate
(OPTIONAL) Allows external routing information to be imported into the NSSA by using
Type 7 default.
no-summary (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on the remaining DNOS platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
C9000 Series
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost
[reference-bandwidth] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per second. The range is from 1
to 4294967. The default is 100 megabits per second.
Open Shortest Path First (OSPFv2 and OSPFv3) 1173