Administrator Guide

Example
Dell EMC#show ipv6 mld snooping groups
Total Number of Groups: 1
Channel ::/ff0e::225:1:1:1, interface Vlan 10
Uptime 11:24:49 , Last join time 00:00:15
Expires in 00:01:54
Ports : Po 1
Dell EMC#
show ipv6 mld snooping interface
View the configured MLD snooping interfaces.
Syntax
show ipv6 mld snooping interface [interface]
Parameters
interface interface Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
Example
DellEMC#show ipv6 mld snooping interface vlan 10
Vlan 10 is up, line protocol is up
Interface address is fe80::3617:ebff:fe30:2482/64
MLD protocol processing disabled
Current MLD snooping version is 2
MLD snooping is enabled on this interface
MLD snooping querier is disabled and is currently inactive
MLD snooping last member query response interval is 1000 ms
MLD snooping explicit tracking is disabled
show ipv6 mld snooping mrouter
Display information on the MLD snooping router.
Syntax
show ipv6 mld snooping mrouter [vlan]
Parameters
VLAN (OPTIONAL) Enter the keyword VLAN then the VLAN number to display the information
on that specific VLAN. The VLAN range is from 1 to 4094.
Defaults None.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
1050 Multicast Listener Discovery Protocol