Users Guide

Dell(conf-if)#end
Dell#
Configuring Port-Based Rate Shaping
Rate shaping buffers, rather than drops, traffic exceeding the specified rate until the buffer is exhausted. If any stream exceeds
the configured bandwidth on a continuous basis, it can consume all of the buffer space that is allocated to the port.
• Apply rate shaping to outgoing traffic on a port.
INTERFACE mode
rate shape
• Apply rate shaping to a queue.
QoS Policy mode
rate shape
Example of rate shape Command
Dell#config
Dell(conf)#interface tengigabitethernet 1/2
Dell(conf-if)#rate shape 500 50
Dell(conf-if)#end
Dell#
Quality of Service (QoS) 761