Users Guide

• In Scenario 4, RP1 has a default peer plus an access list. The list permits RP4 so the RPF check is disregarded for active
sources from it, but RP5 (and all others because of the implicit deny all) are subject to the RPF check and fail, so those
active sources are rejected.
Figure 87. MSDP Default Peer, Scenario 1
Figure 88. MSDP Default Peer, Scenario 2
Figure 89. MSDP Default Peer, Scenario 3
Figure 90. MSDP Default Peer, Scenario 4
Multicast Source Discovery Protocol (MSDP) 574