Users Guide

no disable
R1(conf-lldp)#
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
• View a readable version of the TLVs.
debug lldp brief
• View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU.
debug lldp detail
Figure 80. The debug lldp detail Command — LLDPDU Packet Dissection
Relevant Management Objects
The system supports all IEEE 802.1AB MIB objects.
The following tables list the objects associated with:
• received and transmitted TLVs
• the LLDP configuration on the local agent
• IEEE 802.1AB Organizationally Specific TLVs
• received and transmitted LLDP-MED TLVs
Link Layer Discovery Protocol (LLDP) 561