Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
411412413414415416417418419420
PeGi 255/3/26 Up 1000 Mbit Full --
PeGi 255/3/27 Up 1000 Mbit Full --
PeGi 255/3/28 Up 1000 Mbit Full --
PeGi 255/3/29 Up 1000 Mbit Full --
PeGi 255/3/30 Up 1000 Mbit Full --
PeGi 255/3/31 Up 1000 Mbit Full --
PeGi 255/3/32 Up 1000 Mbit Full --
PeGi 255/3/33 Up 1000 Mbit Full --
PeGi 255/3/34 Up 1000 Mbit Full --
PeGi 255/3/35 Up 1000 Mbit Full --
PeGi 255/3/36 Up 1000 Mbit Full --
PeGi 255/3/37 Up 1000 Mbit Full --
PeGi 255/3/38 Up 1000 Mbit Full --
PeGi 255/3/39 Down Auto Auto --
PeGi 255/3/40 Up 1000 Mbit Full --
PeGi 255/3/41 Down Auto Auto --
PeGi 255/3/42 Down Auto Auto --
PeGi 255/3/43 Up 1000 Mbit Full --
PeGi 255/3/44 Up 1000 Mbit Full --
PeGi 255/3/45 Up 1000 Mbit Full --
PeGi 255/3/46 Down Auto Auto --
PeGi 255/3/47 Up 10
PeGi 255/3/48 Up 10
To view which interfaces are enabled for Layer 3 data transmission, use the show ip interfaces brief command in EXEC
Privilege mode. In the following example, TengigabitEthernet interface 1/5 is in Layer 3 mode because an IP address has been
assigned to it and the interface’s status is operationally up.
Dell#show ip interface brief
Interface IP-Address OK? Method Status Protocol
TengigabitEthernet 1/0 unassigned NO Manual administratively down down
TengigabitEthernet 1/1 unassigned NO Manual administratively down down
TengigabitEthernet 1/2 unassigned YES Manual up up
TengigabitEthernet 1/3 unassigned YES Manual up up
TengigabitEthernet 1/4 unassigned YES Manual up up
TengigabitEthernet 1/5 10.10.10.1 YES Manual up up
TengigabitEthernet 1/6 unassigned NO Manual administratively down down
TengigabitEthernet 1/7 unassigned NO Manual administratively down down
TengigabitEthernet 1/8 unassigned NO Manual administratively down down
To view only configured interfaces, use the show interfaces configured command in the EXEC Privilege mode.
To determine which physical interfaces are available, use the show running-config command in EXEC mode. This
command displays all physical interfaces available on the line cards.
Dell#show running
Current Configuration ...
!
interface TengigabitEthernet 9/6
no ip address
shutdown
!
interface TengigabitEthernet 9/7
no ip address
shutdown
!
interface TengigabitEthernet 9/8
no ip address
shutdown
!
interface TengigabitEthernet 9/9
no ip address
shutdown
Interfaces 418