Administrator Guide

• Cabling: Route the cabling to avoid sources of electrical noise, such as radio transmitters, broadcast ampliers, power lines, and
uorescent lighting xtures. Make sure that the cabling is safely away from other devices that might damage the cables. If needed,
allow 1 RU between devices to provide room for cabling.
• Altitude: Altitude at the installation site is below 10,000 feet (3048 m).
• Humidity: The relative humidity around the operating switch is between 5% and 95% (non-condensing) with 91°F (33°C) maximum
dew point.
• Dust: Install the switch in an environment as free as possible from dust and foreign conductive material (such as metal akes from
construction activities). Cooling mechanisms, such as fans in the switch, can draw dust and other particles inside the chassis, which
can result in system malfunction.
C9010 Hardware Description 7