Administrator Guide

LED Color / Description
RJ-45 Management Ethernet
port: Link LED (left LED below
port)
• O — No data link activity
• Solid green — Link is up and operating at maximum port speed; if auto-negotiated, port is operating
at 1G.
• Solid amber — Link is up and operating at lower speed; if auto-negotiated, port is operating at
10/100M.
RJ-45 Management Ethernet
port: Activity LED (right LED
below port)
• O — No data link activity
• Flashing green — Link is up and transmitting/receiving data.
Figure 28. 40GbE QSFP+ Port LEDs
1
4x10G Port Link/Activity LEDs above each 40GbE QSFP+ port 2 Module LED
Table 3. 40GbE QSFP+ Port LEDs
LED Color / Description
40GbE Port Link/
Activity LED (leftmost
LED)
• O — No link or interface is disabled.
• Solid green — 40G link is up and 40GbE QSFP+ interface is enabled.
• Flashing green — 40GbE port is transmitting/receiving data at maximum 40G speed.
• Solid amber — 40G link is up but operating at lower speed (less than 40G).
• Flashing amber — 40GbE port is transmitting/receiving data at a lower speed (less than 40G).
• Flashing amber (1 second on, 1 second o) — Port beacon used to locate port
4x10G Port Link/
Activity LED
• O — No link or interface is disabled.
• Solid amber — 10G link is up and operating at 10G speed.
• Flashing amber — 4x10G port is transmitting/receiving data at 10G speed.
• Flashing amber (1 second on, 1 second o) — Port beacon used to locate port
Module/Location LED
• O — No power
• Solid green — Normal operation
• Flashing blue — Beacon LED is being used to locate the module.
• Flashing amber — Error condition or reload in progress
Installing the Hardware 39