Administrator Guide

WARNING: To prevent bodily injury when mounting or servicing this unit in a rack, take special precautions to ensure that the
system remains stable. The following guidelines are provided to ensure your safety:
• If your chassis is the only unit in the rack, mount it at the bottom of the rack.
• When mounting this unit in a partially lled rack, load the rack from the bottom to the top with the heaviest component at the
bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.
• If the chassis is shipped with blanks, remove the blanks from each RPM, line card, fan module and PSU slot before lifting the
chassis.
1 (Optional) The C9010 chassis ts into a rack enclosure with the front door closed. If you plan to use cable management brackets
(Installing the Cable Management System ) and close the front door, re-position and fasten the front rack posts 6.5 inches (165 mm)
back towards the rear of the rack to leave space for the brackets.
2 Determine the height at which you want to mount the chassis in the rack.
Installing the Hardware 13