Users Guide

show ipv6 interface
Display the status of interfaces configured for IPv6.
C9000 Series
Syntax
show ipv6 interface interface [linecard slot-id] [brief] [configured]
[loopback interface-number] [managementethernet slot/port] [port-channel
number][tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port]
[tunnel tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For a Loopback interface, enter the keyword Loopback then a number from 0
to 16383.
● For the Null interface, enter the keyword null then zero (0).
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a tunnel interface, enter the keyword tunnel then the tunnel ID.
● For a VLAN interface, enter the keyword VLAN.
● For a port channel interface, enter the keywords port-channel.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line
card. The range of slot IDs is from 0 to 2.
brief (OPTIONAL) View a summary of IPv6 interfaces.
configured (OPTIONAL) View information on all IPv6 configured interfaces.
managementethe
rnet slot/ port
(OPTIONAL) View information on an IPv6 Management port. Enter the slot number
(0-1) and port number zero (0).
loopback (OPTIONAL) View information for IPv6 Loopback interfaces.
port-channel (OPTIONAL) View information for IPv6 port channels.
tengigabitethern
et
(OPTIONAL) View information for an IPv6 tengigabitethernet interface.
fortyGigE (OPTIONAL) View information for an IPv6 fortygigabitethernet interface.
tunnel tunnel-id (OPTIONAL) View information for a tunnel interface.
vlan (OPTIONAL) View information for IPv6 VLANs.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added support for IPv6 recursive DNS addresses.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Added support for tunnel interface.
IPv6 Basics 963