Users Guide

INTERFACE (BATCH MODE)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
ipv6 nd dns-server
Configure Recursive DNS Server (RDNSS) addresses for distribution via IPv6 router advertisements to an IPv6 device.
C9000 Series
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
To remove the IPv6 RDSS configuration, use no ipv6 nd dns-server {ipv6-RDNSS-address}
{lifetime | infinite}
Parameters
ipv6-RDNSS-
address
Enter the IPv6 Recursive DNS Server’s (RDNSS) address. You can specify up to 4
IPv6 RDNSS server addresses.
lifetime Enter the lifetime in seconds. The amount of time the IPv6 host can use the IPv6
RDNSS address for name resolution. The range is 0 to 4294967295 seconds.
When you specify the maximum lifetime value of 4294967295 or infinite, the
lifetime does not expire. A value of 0 indicates to the host that the RDNSS address
should not be used. You must specify a lifetime using the lifetime or
infinite parameter.
infinite Enter the keyword infinite to specify that the RDNSS lifetime does not expire.
Defaults Not Configured
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage
Information
Use the ipv6 nd dns-server command to add, edit, or delete an IPv6 RDNSS address and lifetime
value. You can configure up to four IPv6 RDNSS addresses. You must specify a lifetime using the lifetime
954 IPv6 Basics