Users Guide

Related
Commands
permit (for Standard IPv6 ACLs) – configures a filter to forward IPv6 packets.
show ipv6 access-lists
Display IPv6 access-list information.
C9000 Series
Syntax
show ipv6 access-lists { [name] | interface } { in | out | interface }
Parameters
access-list Enter the keywords access-list to display information for all ipv6 access-lists.
acl_name Enter the keywords acl_name to display information for a specified ipv6 access-
list.
in Enter the keyword in to display information for an ipv6 ingress access-list
attached to an interface.
out Enter the keyword out to display information for an ipv6 egress access-list
attached to an interface.
interface Enter the keyword interface to display information for an ipv6 access-list for a
specific interface.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
No output displays If you do not attach an ingress or egress access-list to an interface and you return to
the DELL# prompt.
Example
Dell#show ipv6 access-list V6-ACL in
Ingress IPV6 access list V6-ACL
seq 5 permit tcp any any count (0 packets)
seq 10 permit udp any any count (0 packets)
Dell#
show ipv6 accounting access-list
View the IPv6 access-list and the sequence of filters.
C9000 Series
Syntax
show ipv6 accounting {access-list access-list-name | cam_count} interface
interface
Parameters
access-list-name Enter the name of the ACL that you want to display. The ACL name size is limited
to 140 characters.
IPv6 Access Control Lists (IPv6 ACLs) 943