Users Guide

Version Description
E-Series Original command.
Usage
Information
If you do not specify parameters and enter service timestamps, it appears as service timestamps debug
uptime in the running-configuration.
To view the current options set for the service timestamps command, use the show running-
config command.
show alarms
View alarms for the system Core, switching core, port modules, fan trays, and power supplies.
C9000 Series
Syntax
show alarms [pe pe-id | threshold]
Parameters
pe pe-id (OPTIONAL) Enter the keyword pe to display the alarms for port extender (PE). The
PE ID range is from 0 to 255.
threshold (OPTIONAL) Enter the keyword threshold to display the temperature thresholds
set for the line cards, RPM, SFMs, and PE (when configured).
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Examples
Dell#show alarms
-- Minor Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
No minor alarms
-- Major Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
92 Control and Monitoring