Users Guide

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
1.1.32.140/32 0 0 200 00:00:00:00:1f:8a PeGigE <PE‐ID>/<Slot>/<Port>
show ip fib linecard
View all forwarding information base (FIB) entries.
C9000 Series
Syntax
show ip fib linecard linecard id {vrf <vrf-id>/<A.B.C.D>/summary}
Parameters
linecard Displays the fib entries for the mentioned linecard id.
vrf Displays the fib entries for the mentioned vrf-id. Otherwise, vrf displays the default
vrf entries.
A.B.C.D. Displays the fib entry for the mentioned prefix.
summary Displays the fib summary.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.9.1.0 Introduced VRF on the E-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Example
Dell>show ip fib linecard 2
Destination Gateway First-Hop Mac-
Addr Port VId EC
----------------------------------------------------------------
------------------- ----------------- ------------
1.1.32.140/32 via 1.1.32.140, PeGigE PE‐ID/Slot/Port 1.1.32.140
00:00:00:00:1f:8a PeGigE PE‐ID/Slot/Port 200 0
910 IPv4 Routing