Users Guide

Example (IPv4)
Dell#ping 172.31.1.255
Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 172.31.1.255, timeout is 2 seconds:
Reply to request 1 from 172.31.1.208 0 ms
Reply to request 1 from 172.31.1.216 0 ms
Reply to request 1 from 172.31.1.205 16 ms
::
Reply to request 5 from 172.31.1.209 0 ms
Reply to request 5 from 172.31.1.66 0 ms
Reply to request 5 from 172.31.1.87 0 ms
Dell#
Example (IPv6)
Dell#ping 100::1
Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds:
!!!!!
Success rate is 100.0 percent (5/5), round-trip min/avg/max = 0/0/0 (ms)
Dell#
power on
C9000 Series
Syntax
power on
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
reload
Reboot the system.
C9000 Series
Syntax
reload [conditional nvram-cfg-change | pe pe-id]
From a PE console, use reload to perform a cold restart.
Parameters
conditional
nvram-cfg-
change
Reload if the condition is true. A configuration change to the nvram requires a
switch reload. To reload the switch, select nvram-cfg-change.
pe Reload the RMP, PE unit, or the entire PE stack configured under that PE unit.
Command Modes EXEC Privilege
Control and Monitoring 89