Users Guide

Queueing strategy: fifo
Input Statistics:
31035168 packets, 24674745108 bytes
17 64-byte pkts, 1278919 over 64-byte pkts, 2729921 over 127-byte
pkts
5457788 over 255-byte pkts, 10924046 over 511-byte pkts, 10644476
over 1023-byte pkts
497 Multicasts, 0 Broadcasts, 31034654 Unicasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
30771019 packets, 24493783827 bytes, 0 underruns
16 64-byte pkts, 1247561 over 64-byte pkts, 2706754 over 127-byte
pkts
5417155 over 255-byte pkts, 10823333 over 511-byte pkts, 10576198
over 1023-byte pkts
481 Multicasts, 0 Broadcasts, 30770539 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 1555.00 Mbits/sec, 244550 packets/sec, 31.88% of line-rate
Output 676.00 Mbits/sec, 106216 packets/sec, 13.86% of line-rate
Time since last interface status change: 00:01:41
Example
Dell# show interfaces port-channel 20
Port-channel 20 is up, line protocol is up (Failover-group 1 is down)
Hardware address is 00:01:e8:01:46:fa
Port-channel is part of failover-group 1
Internet address is 1.1.120.1/24
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 2000 Mbit
Members in this channel: Te 0/5 Te 0/18
ARP type: ARPA, ARP timeout 04:00:00
Last clearing of "show interfaces" counters 00:00:00
Queueing strategy: fifo
44507301 packets input, 3563070343 bytes
Input 44506754 IP Packets, 0 Vlans 0 MPLS
41 64-byte pkts, 44502871 over 64-byte pkts, 249 over 127-byte pkts
407 over 255-byte pkts, 3127 over 511-byte pkts, 606 over 1023-byte
pkts
Received 0 input symbol errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 IP Checksum, 0 overrun, 0 discarded
1218120 packets output, 100745130 bytes, 0 underruns
Output 5428 Multicasts, 4 Broadcasts, 1212688 Unicasts
1216142 IP Packets, 0 Vlans, 0 MPLS
0 throttles, 0 discarded
Rate info (interval 299 sec):
Input 01.50Mbits/sec, 2433 packets/sec
Output 00.02Mbits/sec,4 packets/sec
Time since last interface status change: 00:22:34
Dell#
Usage
Information
The following describes the show interfaces port-channel brief command shown in the
following example.
Field Description
LAG Lists the port channel number.
Mode Lists the mode:
● L3 — for Layer 3
● L2 — for Layer 2
Status Displays the status of the port channel.
● down — if the port channel is disabled (shutdown)
● up — if the port channel is enabled (no shutdown)
Uptime Displays the age of the port channel in hours:minutes:seconds.
772 Interfaces