Users Guide

SFP+ 1 Voltage = 3.281V
SFP+ 1 Tx Bias Current = 6.746mA
SFP+ 1 Tx Power = 0.635mW
SFP+ 1 Rx Power = 0.002mW
===================================
SFP+ 1 Data Ready state Bar = False
SFP+ 1 Rx LOS state = True
SFP+ 1 Tx Fault state = False
SFP+ 1 Rate Select state = True
SFP+ 1 RS state = False
SFP+ 1 Tx Disable state = False
===================================
SFP+ 1 Temperature High Alarm Flag = False
SFP+ 1 Voltage High Alarm Flag = False
SFP+ 1 Tx Bias High Alarm Flag = False
SFP+ 1 Tx Power High Alarm Flag = False
SFP+ 1 Rx Power High Alarm Flag = False
SFP+ 1 Temperature Low Alarm Flag = False
SFP+ 1 Voltage Low Alarm Flag = False
SFP+ 1 Tx Bias Low Alarm Flag = False
SFP+ 1 Tx Power Low Alarm Flag = False
SFP+ 1 Rx Power Low Alarm Flag = True
===================================
SFP+ 1 Temperature High Warning Flag = False
SFP+ 1 Voltage High Warning Flag = False
SFP+ 1 Tx Bias High Warning Flag = False
SFP+ 1 Tx Power High Warning Flag = False
SFP+ 1 Rx Power High Warning Flag = False
SFP+ 1 Temperature Low Warning Flag = False
SFP+ 1 Voltage Low Warning Flag = False
SFP+ 1 Tx Bias Low Warning Flag = False
SFP+ 1 Tx Power Low Warning Flag = False
SFP+ 1 Rx Power Low Warning Flag = True
Related
Commands
● interface — configures a physical interface on the switch.
● show ip interface — displays Layer 3 information about the interface.
● show interfaces — displays information on a specific physical interface or virtual interfaces.
● show inventory — displays the switch type, components (including media), Dell Networking OS
version including hardware identification numbers and configured protocols.
show interfaces vlan
Display VLAN statistics.
C9000 Series
Syntax
show interfaces vlan {vlan-id} [LINE] {description}
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to 4094.
LINE (OPTIONAL) Enter the name of the VLAN.
description Displays the VLAN interface information with description.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced this command.
754 Interfaces