Users Guide

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.1.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Output augmented with diagnostic data for pluggable media.

7.7.1.0 Removed three fields in the output: Vendor Name, Vendor OUI, and Vendor PN.

7.6.1.0 Introduced on the C-Series and S-Series.

6.5.4.0 Introduced on the E-Series.

Usage

Information

The following describes the show interfaces transceiver command shown in the following

example.

Line Description

Rx Power

measurement

type

Output depends on the vendor, typically either “Average” or “OMA” (Receiver

optical modulation amplitude).

Temp High Alarm

threshold

Factory-defined setting, typically in Centigrade. Value differs between SFPs and

SFP+.

Voltage High

Alarm threshold

Displays the interface index number that SNMP uses to identify the interface.

Bias High Alarm

threshold