Users Guide

PeGi 255/3/35 Up 1000 Mbit Full --
PeGi 255/3/36 Up 1000 Mbit Full --
PeGi 255/3/37 Up 1000 Mbit Full --
PeGi 255/3/38 Up 1000 Mbit Full --
PeGi 255/3/39 Down Auto Auto --
PeGi 255/3/40 Up 1000 Mbit Full --
PeGi 255/3/41 Down Auto Auto --
PeGi 255/3/42 Down Auto Auto --
PeGi 255/3/43 Up 1000 Mbit Full --
PeGi 255/3/44 Up 1000 Mbit Full --
PeGi 255/3/45 Up 1000 Mbit Full --
PeGi 255/3/46 Down Auto Auto --
PeGi 255/3/47 Up 1000 Mbit Full 111
PeGi 255/3/48 Up 1000 Mbit Full 111
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE 802.1Q
tag status and VLAN membership.
C9000 Series
Syntax
show interfaces switchport [interface] [linecard slot-id]
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port (ports or port-range) information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port (ports or port-range) information.
● Enter the keyword backup to view the backup interface for this interface.
● For a port extender Gigabit Ethernet interface, enter the keyword peGigE then
the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is from 1
to 48.
NOTE: The peGigE interface option is only visible when the feature extended
bridge is enabled.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line
card. The range of slot IDs is from 0 to 11.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
744 Interfaces