Users Guide

show interfaces status
To display status information on a specific interface only, display a summary of interface information or specify a line card slot
and interface.
C9000 Series
Syntax
show interfaces [interface | linecard slot-number] status
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port (ports or port-range) information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port (ports or port-range) information.
● For a Loopback interface, enter the keyword loopback then the slot/port
information. The range is from 0 to 16383.
● For a Port-Channel interface, enter the keyword port-channel then the
number. The range is from 0 to 128.
●
For a port extender Gigabit Ethernet interface, enter the keyword peGigE then
the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is from 1
to 48.
NOTE: The peGigE interface option is only visible when the feature extended
bridge is enabled.
linecard slot-
number
(OPTIONAL) Enter the keyword linecard then the slot number. The slot ID is
from 0 to 11.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage
Information
To view the show output for multiple ports of a specified slot at a time, you can specify any random port
number or a range of ports, or a combination of both.
740 Interfaces