Users Guide

size date time name
-------- ------ ------ --------
512 Jul-20-2004 18:15:00 tgtimg
512 Jul-20-2004 18:15:00 diagnostic
512 Jul-20-2004 18:15:00 other
512 Jul-20-2004 18:15:00 tgt
226 Transfer complete
329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>
Related
Commands
ftp-server topdir — sets the directory to be used for incoming FTP connections to the E-Series.
ftp-server username — sets a username and password for incoming FTP connections to the E-Series.
ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
C9000 Series
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell Networking
recommends specifying a top-level directory path. Without a top-level directory path specified, the
system directs users to the flash directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the switch.
ftp-server username — sets a username and password for incoming FTP connections.
74 Control and Monitoring