Users Guide

Example (Single
Range)
This example shows a single range bulk configuration.
Dell(config)# interface range tengigabitethernet 1/1 - 23
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
(peGigE-Single
Range)
This example shows single range configuration for PE Gigabit Ethernet ports.
Dell(conf)#interface range pegigE 1/0/3-14
Dell(conf-if-range-pegi-1/0/3-14)#
Example
(Multiple Range)
This example shows how to use commas to add different interface types to the range enabling all 10-
Gigabit Ethernet interfaces in the range 2/1 to 2/23 and both 10-Gigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1-2
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
(Multiple Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1–2,
Vlan 2–100, Port 1–25
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Related
Commands
● interface port-channel — configures a port channel group.
● interface vlan — configures a VLAN interface.
● show config (from INTERFACE RANGE mode) — shows the bulk configuration interfaces.
● show range — shows the bulk configuration ranges.
● interface range macro (define) — defines a macro for an interface-range.
interface range macro (define)
Defines a macro for an interface range and then saves the macro in the running configuration.
C9000 Series
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the interfaces — slot/port,
pe-id/stack-unit/port-id, port-channel, or VLAN number. Select the range of
interfaces for bulk configuration. You can enter up to six comma-separated ranges.
Spaces are not required between the commas. Comma-separated ranges can
include VLANs, port-channels, and physical interfaces.
Slot/Port information must contain a space before and after the dash. For example,
interface range tengigabitethernet 0/1 - 5 is valid; interface
range tengigabitethernet 0/1-5 is NOT valid.
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Interfaces 705