Users Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage
Information
After entering the banner login command, type one or more spaces and a delineator character. Enter the
banner text then the second delineator character. When the user is connected to the router, if a message
of the day banner is configured, it displays first. If no message of the day banner is configured, the login
banner and prompt appear. After the user has logged in, the EXEC banner (if configured) displays.
Related
Commands
● banner exec — enables the display of a text string when you enter EXEC mode.
● banner login — sets a banner to display after successful login to the system.
cam-acl
Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.
C9000 Series
Syntax
cam-acl {default | l2acl number{ ipv4acl number ipv6acl number ipv4qos
number l2qos number l2pt number ipmacacl number vman-qos | vman-dual-qos
number ecfmacl number [ openflow number fcoeacl number | fedgovacl number|
nlbclusteracl number | ipv4pbr number | iscsioptaclnumber | openflow number
| vrfv4ac numberl ]}}
Parameters
default Use the default CAM profile settings and set the CAM as follows:
● L3 ACL (ipv4acl): 4
● L2 ACL(l2acl): 5
● IPv6 L3 ACL (ipv6acl): 0
● L3 QoS (ipv4qos): 2
● L2 QoS (l2qos): 1
● OpenFlow: 0 (disabled)
● FCoE (fcoeacl): 0 (disabled)
● iSCSI Optimization (iscsioptacl): 0 (disabled)
● L2 PT : 0
● IP-MAC ACL : 0
● Vman QoS : 0
● ECFM ACL: 0
● IPv4 PBR : 0
● VRFv4 ACL : 0
● FedGov ACL : 0
● NLB Cluster ACL : 0
l2acl number
Allocate space to each CAM region.
Enter the CAM profile name then the amount for CAM space allocation. The total
space allocated must be equal to 12. The IPv6 ACL range must be a factor of 2.
Enter l2acl and the FP block number for L2 ACL. The FP block number range is
from 1 to 8.
Control and Monitoring 61