Users Guide

show cam-acl-pe
Display details of global ingress CAM ACL profiles for the port extender.
C9000 Series
Syntax
show cam-acl-pe
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The display reflects the settings implemented with the cam-acl-pecommand.
This command only displays the details of CAM ACL profiles configured globally on the PE. It does not
display CAM ACL profiles for each PE.
Example
Dell# show cam-acl-pe
-- Port extender Cam ACL --
Current Settings(in block sizes)
1 block = 256 entries
L2Acl : 6
Ipv4Acl : 4
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
IpMacAcl : 0
show cam-acl-egress-pe
Display details of the global egress CAM ACL profiles for the port extender.
C9000 Series
Syntax
show cam-acl-egress-pe
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Content Addressable Memory (CAM) 493