Users Guide

Version Description
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Usage
Information
The following regions must be provided in the show cam-usage output:
● L3AclCam
● L2AclCam
● V6AclCam
The following table describes the output fields of the show cam-usage command.
Table 2. show cam-usage Command Description.
Field Description
LineCard Number of the line card that contains information
on ACL VLAN groups
Portpipe The hardware path that packets follow through a
system for ACL optimization
CAM-Region Type of area in the CAM block that is used for
ACL VLAN groups
Total CAM space Total amount of space in the CAM block
Used CAM Amount of CAM space that is currently in use
Available CAM Amount of CAM space that is free and remaining
to be allocated for ACLs
Example 1
Dell#show cam-usage
Linecard|Portpipe| CAM Partition | Total CAM | Used CAM |Available
CAM
========|========|=================|============|============|
==============
1 | 0 | IN-L2 ACL | 1008 | 320 | 688
| | IN-L2 FIB | 32768 | 1132 | 31636
| | IN-L3 ACL | 12288 | 2 | 12286
| | IN-L3 FIB | 262141 | 14 | 262127
| | IN-L3-SysFlow | 2878 | 45 | 2833
| | IN-L3-TrcList | 1024 | 0 | 1024
| | IN-L3-McastFib | 9215 | 0 | 9215
| | IN-L3-Qos | 8192 | 0 | 8192
| | IN-L3-PBR | 1024 | 0 | 1024
| | IN-V6 ACL | 0 | 0 | 0
| | IN-V6 FIB | 0 | 0 | 0
| | IN-V6-SysFlow | 0 | 0 | 0
| | IN-V6-McastFib | 0 | 0 | 0
| | OUT-L2 ACL | 1024 | 0 | 1024
| | OUT-L3 ACL | 1024 | 0 | 1024
| | OUT-V6 ACL | 0 | 0 | 0
1 | 1 | IN-L2 ACL | 320 | 0 | 320
| | IN-L2 FIB | 32768 | 1136 | 31632
| | IN-L3 ACL | 12288 | 2 | 12286
| | IN-L3 FIB | 262141 | 14 | 262127
| | IN-L3-SysFlow | 2878 | 44 | 2834
--More--
Example 2
Dell#show cam-usage acl
Linecard|Portpipe| CAM Partition | Total CAM | Used CAM |Available
CAM
========|========|================|=============|============|
============
11 | 0 | IN-L2 ACL | 1008 | 0 |
1008
Content Addressable Memory (CAM) 491