Users Guide

show cam-acl
Display the details of the CAM profiles on the chassis and all stack units.
C9000 Series
Syntax
show cam-acl
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series.
Usage
Information
The display reflects the settings implemented with the cam-acl command.
Example
show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer 3 ACL, and
IPv4Flow).
C9000 Series
Syntax
show cam-usage [acl | router | switch]
Parameters
acl
(OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM
usage.
router
(OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
switch
(OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5.(0.0) Introduced on the Z9500.
490 Content Addressable Memory (CAM)